Tabla de contenido
Publicidad
Solution to Operational Problems
cont.
4.3 Jamming
- Ensure there are no foreign objects that could accidentally fall into the
equipment (clip, tape, etc. )
- To avoid jamming the bills, position them correctly in the feeding channel.
- Make sure the bill does not have adhesive tape.
- The bill cannot be very wrinkled or torn.
- If any bill or other object accidentally jams inside the detector:
1. Turn off the detector immediately.
2. Carefully proceed to remove the bill or object causing the problem.
3. Turn on the detector again and verify it is working at an optimum level.
4.4 Cleaning of Magnetic Heads
1.
Turn on the detector and insert a magnetic head cleaning card through the
detection channel as if you were going to check a regular bill.
2.
Pass the cleaning card several times to help remove dust that is adhering to
the surface of the magnetic heads. Wait about two minutes before
proceeding to check bills again.
14
Publicidad
Tabla de contenido
