Tabla de contenido
Publicidad
3.1 Basic Operation
Connect the power cable to the detector and then connect the adapter to the
1.
power outlet. When turning on the detector, it will proceed with a self-check
routine that lasts 2 seconds. The display will light the green indicator
which means the equipment is ready to check the bills.
Insert the bill to be checked in any direction. When a bill is inserted
2.
into the detector's feeding channel, an optical sensor located in this
compartment allows the detector to automatically begin the verification process.
The bill will be transported inside the unit and analyzed immediately.
3. If the bill is genuine, the green indicator
beep.
4. If the bill is suspicious, the red indicator
beeps.
will light up and sound a single warning
will light up and sound two warning
9
3. Operation
,
Publicidad
Tabla de contenido
