HP LaserJet Pro MFP M282 Manual De Instrucciones página 5

Troubleshooting
Wireless connection troubleshooting
Verify that the printer is within the range of the wireless network. For most networks, the printer must be within 30 m (100 ft) of the wireless access
point (wireless router). A USB cable might be required for temporary connection between the printer and the computer. To ensure that the wireless setup
information synchronizes correctly, do not connect the USB cable until prompted to do so.
Follow these steps to restore the network settings:
1. Remove the USB cable from the printer.
2. Go to the Setup menu on your printer, select Network Setup, and then select Restore Defaults/Restore Network Settings. The printer will restore
network default automatically and restart.
3. Continue to install the software.
User guide and additional support resources
The user guide includes printer usage and troubleshooting information. It is
available on the web: www.hp.com/support/ljM282MFP.
Go to
Check for firmware updates
1. Go to www.hp.com/support/ljM282MFP.
2. Select a printer or category from the list, and then click Drivers.
3. Select the operating system, and click the Next button.
4. Select Firmware, and click the Download button.
Wireless printing
For more information about wireless
printing and wireless setup, go to
www.hp.com/go/wirelessprinting.
Control panel help
Touch the Help button on the printer control panel to access help topics.
5