Manuales relacionados para HP LaserJet Pro MFP M225 Serie
Resumen de contenidos para HP LaserJet Pro MFP M225 Serie
- Página 1 LaserJet Pro MFP M225, M226 M225dn M225dw M225rdn M226dw M226dn *CF484-90937* *CF484-90937* CF484-90937 Installation Guide Guide d’installation Guía de instalación Guia de instalação Lea esto primero...
- Página 2 15° - 30°C (59° - 86°F) 10% - 80% Select a sturdy, well-ventilated, dust-free area, away from direct sunlight to position the product. Choisissez un support solide et un endroit propre, bien aéré et à l’abri du rayonnement direct du soleil pour placer votre produit. Busque una superficie sólida en un lugar bien ventilado, sin polvo y alejado de la luz solar directa para colocar el producto.
- Página 5 1. Connect the phone cord for fax. A country/region specific adapter for the RJ11 telephone cord may be required to connect to the telephone jack. 2. Optional: To connect an extension phone, connect another phone cord to the bottom phone port. 1.
- Página 6 1. Connect the power cord between the product and a grounded AC outlet. Make sure your power source is adequate for the product voltage rating. The voltage rating is on the product label. The product uses either 110-127 Vac or 220-240 Vac and 50/60 Hz. CAUTION: To prevent damage to the product, use only the power cord that is provided with the product.
- Página 7 1. Conecte o cabo de alimentação entre o produto e a tomada CA aterrada. Verifique se sua fonte de alimentação é adequada para a classificação de tensão do produto. A classificação de tensão está na etiqueta do dispositivo. O dispositivo utiliza 110-127 Vca ou 220-240 Vca e 50/60 Hz.
- Página 8 Download from the Web: If the CD is not available, or if your computer does not have an optical drive, download the software installation files from the Web: 1. Go to www.hp.com/support/ljMFPM225 or www.hpcom/support/ljMFPM226. 2. Click Drivers. 3. Select the operating system, and click Next.
- Página 10 Choose a software install method. NOTE: You must have administrator privileges on the computer to install the software. Choisissez une méthode d'installation logicielle. REMARQUE : Vous devez disposer des privilèges d'administrateur sur cet ordinateur pour installer le logiciel. Seleccione un método de instalación del software. NOTA: Debe tener privilegios de administrador en el equipo para instalar el software.
- Página 11 Software installation for Windows wired networks: Connect the network cable to the product and the network. Insert the product CD into the computer, or launch the software installation .exe file that you downloaded from the Web, and follow the on-screen instructions. Installation is complete. NOTE: If the installation program does not detect the product on the network, you might need to enter the IP address manually.
- Página 12 Software installation for Windows wireless networks (wireless models only): 1. On the product control panel, press the wireless button. Select Wireless Menu, and then select Wireless Setup Wizard. Follow the instructions to complete the wireless setup. 2. Insert the product CD into the computer, or launch the software installation .exe file that you downloaded from the Web, and follow the on- screen instructions.
- Página 13 Software installation for Windows USB connections: 1. Insert the product CD into the computer, or launch the software installation .exe file that you downloaded from the Web, and follow the on- screen instructions. If the installation program does not start automatically, browse to the CD drive. Double-click the Setup.exe file to run the program and install the product.
- Página 14 Software installation for Mac OS X: 1. If you are using a USB or a wired network connection, connect the cable now. 2. Open the DMG file that you downloaded from the Web, then open the installer application and follow the onscreen instructions to complete the installation.
- Página 15 Software installation for Mac wireless networks (wireless models only): 1. On the product control panel, press the wireless button. Select Wireless Menu, and then select Wireless Setup Wizard. Follow the instructions to complete the wireless setup. 2. Open the DMG file that you downloaded from the Web, then open the installer application and follow the onscreen instructions to complete the installation.
- Página 16 CD that came with the product or in the HP Program folder on your computer. LCD control panel: To use the HP ePrint feature, first enable HP Web Services by opening a Web browser and typing the product IP address into the address field.
- Página 17 IP do produto no campo de endereço. (O endereço IP do produto é exibido no painel de controle do produto). Na página da Web que abrir, clique na guia Serviços da Web da HP e então clique em Ativar. Para obter mais informações sobre o HP ePrint, acesse o site HP Connected: www.hpconnected.com.
-
Página 20: Fcc Regulations
Les informations contenues dans ce document peuvent être modifiées sans préavis. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Les seules garanties pour les produits et services HP sont décrites dans Nothing herein should be construed as constituting an les déclarations de garantie expresse qui accompagnent ces produits et...