Disposal; Troubleshooting - Philips SC1982 Manual Del Usuario

ENGLISH
30

Disposal

- Do not throw away the device with the normal
household waste at the end of its life, but hand
it in at an official collection point for recycling. By
doing this, you help to preserve the environment.

Troubleshooting

My Philips Lumea Comfort does not start.
- Make sure that the AC cord is plugged into the
device socket properly.
- Make sure that the adapter is plugged into the
electrical outlet properly.
No light pulse is emitted when I press the
pulse button
- Make sure that the yellow READY light is blinking.
- Make sure that you have good skin contact and
that the skin contact surface is evenly and firmly
pressed onto the skin. For your safety, the pulse
button will only activate a pulse if the skin contact
surface is in full contact with the skin.
- Check if the skin color warning light blinks orange.
If it does, the skin color sensor has stopped the
emission of a pulse. Your skin may be too dark to
use Philips Lumea Comfort. Try using the device
on a different part of your body.
- If the READY light is on constantly together with
any number of other lights, there is a system error.
Turn off the device and unplug it. Then plug in the
device and try to turn it on again. If the problem
persists, please visit www.philips.com/support or
call 1-800-243-7884 for assistance.