Gallagher BatteryMaster B75 Instrucciones página 8

4-STEP INSTALLATION GUIDE
This energizer is designed for simple installation and operation. Please read these
instructions.
1. Mount the energizer
Installation under cover (No Solar Panel):
Mount the energizer on a wall out of reach of children.
Install where there is no risk of the energizer incurring fire
or mechanical damage and if possible away from heavy
electrical equipment e.g. pumps or other items that may
cause electrical interference.
a. Using the drilling template on centre pages, drill 2
holes (A and B). Use a 4mm (5/32 inch) diameter drill
for posts or timber walls, or use a suitable wall plug for
brick or concrete walls.
b. Using the screws clipped to the energizer, secure a
screw in hole (A).
c. Hang the energizer on the screw. Fit screw through
energizer into hole (B) for extra stability if necessary.
Permanent fence installation
1
7
2
1 Energizer
2 Earth stake
3 Strain insulator
4 Post insulator
8
3
8
9
5 Wire tightener
6 Warning sign
7 Earth (Green)
8 Live (Red)
5
4
12
9 Cut out switch
10 Joint clamps
11 Strain post
12 Line post
11
6
10