FRIGOGLASS CMV 375 HC Manual Del Usuario página 14

ENG
If the ICM is not functioning properly or is out of order, please check the following before calling the
authorized service provider:
FAULT
The ICM does not work.
The cooler does not
cool enough. The
products are warm.
The ICM sometimes
makes noise.
There is water on the
floor.
The lights don't work.
If after all the above-mentioned checks the problem with your ICM remains, contact the customer
service department of your supplier and provide the following information:
•
Type of ICM
•
Serial number of the ICM
•
Brief description of the problem / observation
14
POSSIBLE REASONS
Power cord not plugged in.
No power coming through the
socket.
The thermostat setting is not correct.
The ICM has recently been reloaded
with warm products. It takes 8-16
hours to cool them down.
The ICM is loaded in such a way
that the air circulation in the interior
is getting blocked.
The door does not seal properly.
Leakage in the cooling system.
For this particular ice cold
merchandiser, a powerful
mechanism is needed and
consequently a certain amount of
noise cannot be avoided.
Intense metallic noise.
Inclined or curved floor.
The drainage hole for the
condensate water is blocked.
There is a leakage in the tray.
The fluorescent tubes or ballast or
starter are out of order.
HANDLING
Plug it in.
Check for fuse/MCB on the mains.
Rotate the thermostat knob
clockwise.
Preferably, reload the ICM before
night closing.
Load the ICM according to the
standards you have been provided
with by the company.
Repair the doors for proper closing
(this type of repair should be
performed by an authorized
technician).
Repair the leakage (this type of
repair should be performed by an
authorized technician).
Ice Cold Merchandisers are of
dynamic type, according to the
specifications that the company
is offering.
Call a service technician.
Level the ICM properly by adjusting
its feet. Placing a spirit level on the
top of the ICM will assist you in
leveling it.
Unblock the drainage hole.
Call a service technician.
Call a service technician.