PRASTEL M2000PE Guia De Inicio Rapido página 7

M2000PE
Selecting the modalities for using the memory
It is possible to select three different modalities for using the code memory:
F: The codes entered via radio can activate either of the two relays, according to the assignment made with functions F3 and F4.
H: The memory is divided into two parts: lower part from location 1 to location 1000 (associated to PORT 1), upper part from location 1001 to location
2000 (associated to PORT 2).
This function is useful to manage two groups of different users in the same unit, to discriminate the activation of relay 1 or relay 2 with the same user
code (badge, radio, tag).
P: The anti-passback function is active: each code, once one of the two relays is activated (input), cannot be reactivated unless the other one is
activated first (output).
In order to select the modality:
1. Press keys INC and DEC at the same time
2. Press key FUN to access the select functions menu
3. Using keys INC and DEC select function F10
4. Confirm the selection with VAL: the display shows the current value of the modality
5. Using keys INC and DEC select modality F, H or P.
6. Confirm with key VAL: the display returns to selecting functions and the new modality is active
7. Press keys INC and DEC at the same time to exit programming
WARNING: By modifying the modalities for using the memory all previously stored codes are deleted.
In order to assign a remote control to relay 1 in modality H, store it by pressing channel 1 or channel 3. To assign it to relay 2, store it by pressing
channel 2 or channel 4.
Selecting the communication protocol
The control unit can dialog via the serial port by using two different communication protocols:
0: Communication with GTSYSTEM, M2000 or MKEYB.
1: Communication with printer PRINT2000
In order to select the protocol:
1. Press keys INC and DEC at the same time
2. Press key FUN to access the select functions menu
3. Using keys INC and DEC select function F11
4. Confirm the selection with VAL: the display shows the current value of the protocol
5. Using keys INC and DEC select protocol 0 or 1
6. Confirm with key VAL: the display returns to selecting functions and the new protocol is active
7. Press keys INC and DEC at the same time to exit programming
Printing the list of codes
In order to print the list of all the codes in the memory:
1. Set protocol 1 via function F11 (see Selecting the communication protocol)
2. Connect the printer PRINT2000 to the serial port
3. Select function F12
4. Press key VAL
When the printing is finished the control unit returns to the select functions menu.
Printing the events
If protocol 1 has been selected via function F11 (see Selecting the communication protocol), and the printer PRINT2000 is connected to the serial
port, each time a code is received a string will be printed containing the location, user status, user code, date, time and door, in the following format:
LOCATION STATUS USER CODE
DATE TIME
Type of event
Valid Code
Code not stored
Anti-passback (with modality P for using the memory)
The printer PRINT200 must have been previously programmed with the correct date and time.
Operating the system via the remote keyboard
The M2000PE may be connected to a terminal equipped with 4 keys and 4 displays for the remote programming, entering and deleting of codes.
Communication is made via an RS485 serial line.
Maximum link-up distance between the M2000PE and the M/KEYB keyboard/display is 500 metres.
The keys and displays of the remote terminal are exactly the same as those on the base unit both in terms of configuration and functions.
The M2000PE automatically detects the presence of the remote terminal, so that the same can be immediately controlled from the remote keyboard.
Programming cannot be made simultaneously on the central unit and the remote keyboard. In case of programming having been initiated from the
remote keyboard, the displays of the central unit will stay off and vice versa. This means that a programming operation initiated from the central unit
cannot be aborted from the remote keyboard and vice versa.
The terminal permits all M2000PE programming operations except the serial transfer of data from one central unit to another.
Note: Connect the central units as shown in the figure (maximum connection distance is 500 meters).
DOOR
Print example
POS.0001
01/12/00
POS.0000
POS.0001
03/12/00
ENGLISH
VALID 00524602
04:59 DOOR1
INVALID 00524999
APB 00524602
11:04 DOOR1
7
ISM2000PEEU_12_13.doc