GE JGRP17 Instrucciones De Instalación página 10

MAKE THE L.P. GAS CONVERSION
ADJUST AIR SHUTTER
5
BAKE BURNER
Air Shutter
Air Shutter
Screw
Use a screwdriver to loosen the air shutter
A
screw.
1. If the flames were yellow, open the air
shutter more than the original setting.
2. If the flames blew away or fluttered from
the burner, close the air shutter more than
the original setting.
Make the adjustment.
B
Retighten the air shutter screw.
C
Close the oven door and recheck the flame.
D
When all adjustments are made and the
E
results are satisfactory:
1. Replace the orifice fitting cover.
2. Replace the oven baffle (flame spreader).
3. Replace the oven bottom.
Installation Instructions
(CONT.)
Orifice
Fitting
Cover
Fig. 19
10
(CONT.)
ADJUST AIR SHUTTER
5
BROIL BURNER
A The broil burner is located and accessible in
the top rear of the oven.
Use a screwdriver to loosen the air shutter
B
adjustment screw.
1. If the flames were yellow, open the air
shutter more than the original setting.
2. If the flames blew away or fluttered from
the burner, close the air shutter more than
the original.
C Make the adjustment.
Retighten the air shutter screw.
D
Close the oven door and recheck the flame.
E
Air Shutter
Air Shutter Screw
SPECIAL NOTE: To convert the oven back to
natural gas, reverse the instructions given in
making L.P. Adjustments.
WARNING:
complete, locate the L.P. Conversion Sticker
under the storage drawer on the main
bottom. When the Conversion checks OK,
fill out the L.P. sticker and include your
name, organization and date conversion
was made. Apply the sticker to the front
frame opposite the name and number plate
behind the storage drawer to alert others
in the future that this appliance has been
converted to L.P. If converting back to
natural gas from L.P., please remove the
sticker so others know the appliance is
set to use natural gas.
(CONT.)
Fig. 20
Once the conversion is