GE JGRP17 Instrucciones De Instalación página 7

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SECURE THE OVEN
10
IMPORTANT:
all packing material and literature
from the oven before connecting
any electrical supplies.
A
Using a 1/8" drill bit, drill holes through the
side trim and into the cabinet front.
With the screws provided, secure the oven
B
to the wall.
C
If the cabinet cutout is 38" high, use the
short trim and attach to the bottom of the
front frame, with screws provided.
(If the cutout is higher than 38" use the taller trim.)
Installation Instructions
Remove
7
RECHECK STEPS
11
Double check to make sure everything in this
guide has been completed. Rechecking steps will
ensure safe use of the oven.
WARNING:
entry into the cabinet below the unit and
must not be blocked.
The trim permits air

Publicidad

Tabla de contenido
loading

Tabla de contenido