Basic Control Operations; Turning The Solo On Or Off; Adjusting The Volume; Setting The Clock - Boston Acoustics Horizon Solo Manual Del Propietário

Basic Control Operations

Turning the Solo On or Off

Press the
pOwer/VOluMe

Adjusting the Volume

Turn the front panel
pOwer/VOluMe
Note: On the control illustrations –
Regular arrows indicate to press and release the
button or control.
Double headed arrows indicate to press and hold the
button or control.
This symbol indicates the control is turned then pressed.

Setting the Clock

1
Turn the control until the clock icon
MODe
with brackets .
2
Press the control. The clock icon and time display will
MODe
flash.
3
Turn the control to adjust the time.
MODe
4 Press the control again to set the time. The display
MODe
reverts to its previous mode and the new time is set.
Note: The clock can display time in either 12 hour or 24 hour
format. To change the time display turn the
the clock icon with brackets
or "24H". Turn the
MODe

Radio Operation

Selecting a Source

1
Turn the control until the source you want is
MODe
highlighted with brackets. Note that other function and
alarm setting control icons also may be selected.
2 Press the control to select the highlighted item. Or
MODe
just wait a few seconds and the source is automatically
selected. The Solo begins playing the source selected.
Note: You can also select sources by simply pressing the
control. Each press will select the next source in this sequence:
AM > FM > AUX > Presets > AM, etc.
6
control on the center of the front panel.
knob.
MODe
. Press and hold the
control to select the time format you want, then press the control.
is highlighted
control to highlight
control for 5 seconds. The display will show "12H"
MODe
MODe
This illustration shows the FM source
highlighted for selection.