Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Tuning In a Radio Station
1
Use the
control to select the AM or FM radio source.
MODe
2
Turn the
control until the station frequency you want
tune
shows in the display.
• If the radio source you want it already selected you can skip
step
1
and use the
• If the station you select has been assigned to a station preset
the number is displayed.
Station Seek
3
Press the
button. The Solo will seek up the radio band for the next receivable station.
tune
Setting a Station Preset
1
Use the
control to select the AM or FM radio band
MODe
you want to use.
2
Use the
control to tune in the station you want to
tune
assign to a preset.
3
Press and hold the
preset number will light indicating the station has been
assigned to the preset.
In this example FM station 107.9 has been assigned to preset 16.
About Station Presets
The Solo has 20 station presets. The presets can be used to store either AM or FM stations. Because of the way
the Solo places stations in the presets you may want to plan how you store them. Here's how it works. The
first station you store goes into Preset 1. The second station goes into Preset 2 and so on, up to 20 stations. If
you remove a preset all the stations in presets above the one you removed, drop down a preset position. The
table below gives an example.
Preset #
originally programmed stations
after removing presets 2 and 6
It may be helpful to put the presets in some logical order. You could put the FM presets in order of ascending
frequency. For example put 89.7 into Preset 1, 90.9 into Preset 2, 93.7 into Preset 3, etc. Or you could assign
presets on the basis of how often you listen to them. For example, your favorite station could go into Preset 1,
the next favorite into preset 2, etc.
control to tune in a new station.
tune
control. A tone will sound. The
tune
1
2
FM 89.7
FM 90.9
FM 89.7
FM 100.3
3
4
FM 100.3
FM 104.9
FM 104.9
AM 680
AM 1030
5
6
AM 680
AM 850
AM 1030
7
7
Publicidad
Capítulos
Tabla de contenido
