Channel Control
Storing Channels
Antenna→Air/Cable
❑
Before your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e. an Air or a Cable system).
Press the TOOLS button to display Tools menu.
T
You can also switch the antenna by selecting Tools → Switch to Cable (or Air)
Auto Program
❑
•
Air: Air antenna signal.
•
Cable: Cable antenna signal.
Auto: Air and Cable antenna signals
•
STD, HRC and IRC identify various types of cable TV systems. Contact your local
N
cable company to identify the type of cable system that exists in your particular area.
At this point the signal source has been selected.
After all the available channels are stored, it starts to remove scrambled channels.
N
The Auto program menu then reappears.
If you want to stop Auto Programming, press the ENTER
N
The Stop Auto Program? message will be displayed. Select Yes by pressing the
◄ or ► button, then press the ENTER
Clearing Scrambled Channel (Digital)
❑
The Clear Scrambled Channel function is used to filter out scrambled channels after
Auto Program is completed.
This process may take up to 20~30 minutes.
To stop searching scrambled channels: Press the ENTER
N
Press the ◄ button to select Yes, then press the ENTER
This function is only available in Cable mode.
N
Fine Tune (Analog)
❑
Use fine tuning to manually adjust a particular channel for optimal reception.
If you do not store the fine-tuned channel in memory, adjustments are not saved.
N
"*" will appear next to the name of fine-tuned channels.
N
To reset the fine tuning setting, press the ▼ button to select Reset, then press the
N
ENTER
button.
E
Managing Channels
Channel List
❑
Using this menu, you can Add / Delete or set Favorite channels and use the program guide for digital broadcasts.
•
All Channels: Shows all currently available channels.
Added Channels: Shows all added channels.
•
•
Favorite: Shows all favorite channels.
•
Programmed: Shows all current reserved programs.
Press the CH LIST button on the remote control to bring up the channel lists.
O
Using the Color buttons with the Channel List
•
Green (Zoom): Enlarges or shrinks a channel number.
Yellow (Select): Selects multiple channel lists.
•
•
TTOOLS (Tools): Displays the Add (or Delete), Add to Favorite (or Delete from Favorite), Timer Viewing, Channel Name
Edit, Select All, Deselect All, and Auto Program menus (The Options menus may differ depending on the situation.)
Channel Status Display Icons
N
♥
A channel set as a Favorite.
A reserved program
)
button.
E
button.
E
button to select Stop.
E
button.
E
A channel selected by pressing the yellow button.
c
A program currently being broadcast.
(
English - 0
Antenna
: Air
Auto Program
Clear Scrambled Channel
Channel List
Fine Tune
Clear Scrambled Channel
Removing scrambled channel.
DTV Cable 122
Stop
Enter
Fine Tune
Fine Tuned
Air 6*
Reset
Move
Adjust
Save
VOL
CH
CHLIST
MENU
FAV.CH
S.MODE
P.SIZE
SRS
P.MODE
MTS
CC
Continued...
►
3%
Return
+5
Return