Hdd Installation; Usb Connection - Akasa Integral P2STON Manual Del Usuario

4.
Gently insert the tray into the enclosure aligning the guide rail with the grooves of the enclosure housing.
5.
Before fully inserting the tray, connect the HDD activity LED to the -3pin connector and make sure all the
cables are arranged neatly to avoid obstruction.
6.
Insert the tray completely into the housing and secure the enclosure face plate to the enclosure using the
screws provided.
7.
You are now ready to connect your SATA enclosure to the system.
Choose connection you want to use (USB or eSATA) and move to the corresponding chapter of the manual
for further instructions.
NOTE: Do not connect both
(USB and eSATA) cables at the same time.
5

HDD Installation

ESATA

USB CONNECTION

Connecting the INTEGRAL SATA (USB mode)
1. Connect one end of the USB cable into the USB Port of your Integral SATA and the other end into any active
USB port of your PC / MAC.
2. NOTE: Please ensure that you are using the supplied power pack only.
Connect the round end of the DC power cord to the back of the enclosure, making sure it is correctly
aligned. Plug the AC cable into the power pack, and then connect the supplied adapter into an
available AC socket. Switch on the enclosure, LED integral logo should light on.
3. Let Windows / MAC search and install the driver
Windows -
open "My Computer" or
"Computer" to see the icon of the
external hard drive ready to use.
USB Connection
automatically.
6