System Requirement - Akasa Integral P2STON Manual Del Usuario

SPECIFICATIONS
• Internal interface: Serial ATA I / II
• External interface: eSATA, USB2.0 (. backward compatible)
• Transfer rates: up to 480Mb/s on USB 2.0 and up to 3.0Gb/s on eSATA
• Power on indicator: Blue-LED Integral logo
• Case material: Aluminum
• Weight: 50g (without a HDD)
• Dimensions: 28mm (L) x 23 mm (W) x 33mm (H)
• Power requirements: 0-230V (AC)
• Power Adapter Output: .5A, 5V, 2V (DC)
o
• Operating Temperatures: 5 to 50 C
o
• Storage Temperatures: -40 to 70 C
• Operating Humidity: 5 to 90%, non-condensing

SYSTEM REQUIREMENT

PC Requirements
• Minimum Intel Processor Pentium II 350MHz, 64MB RAM
• Windows 2000 / XP / Vista
• Active USB or SATA port
MAC Requirements
• Minimum Apple G3 processor, 64MB RAM
• Mac OS 9., 9.2, 0..5, 0.2, 0.3
• Active USB or eSATA port
BACK PANEL ARRAGEMENT
USB port eSATA port
3
DC input Power switch
Hard Disk Installation
1.
Open the back of the enclosure by undoing the securing screws and sliding the tray out of the
aluminum housing.
NOTE:
Disconnect the LED cable before completely sliding the HDD tray out .
2.
Place the HDD in the tray and connect the SATA data and power connectors to the HDD.
3.
Position the HDD in the tray so that the mounting holes on the HDD line up with the tray mounting holes.
Use the four screws supplied in the mounting kit to secure the HDD in the tray.
HDD Installation
Data Power
4