SSS Siedle DR 800-0 Informacion De Producto página 4

English
Application
The DECT repeater extends the send
and receive range of video commu­
nication from DECT telephones. It
is compatible with the Siedle Scope
S 851-... and the Smart Gateway
Mini SGM 650-...
Performance features:
• Up to 6 repeaters with S 851-...
and SGM 650-...
• Range outdoors up to 300 m,
indoors up to 50 m
• Country-specific repeater
(including adapter)
• Simple commissioning using range
status display
• Operating status, range and com­
munication status displays
• Up to 2 active connections can be
controlled simultaneously from one
DR 800-...
• Update Siedle Scope to the latest
software status.
The latest firmware and detailed
updating instructions are located in
the download area under
www.siedle.com.
• In order to operate an
SGM 650-.../S 851-... with repeater,
the repeater mode must be switched
on.
• The encryption is automatically
switched off.
• The battery life of the handset is
reduced in the repeater mode.
Scope of supply
• DECT repeater DR 800-...
• this product information
• In different country-specific
variants, the country-specific mains
adapters are included.
1 Schematic structure
Base station S 851-... with DECT
repeater DR 800-... maximum con-
figuration
4
2 Device description
a Operational LED
b Connection status LED
c Data transfer LED
d Service USB port
e Reset button
Commissioning
The system is completely installed,
ready to operate and functional.
Activating the repeater mode
• Enter the main menu in a handset
through Settings/System and switch
the repeater mode on. The registra­
tion mode is automatically started.
• DECT encryption is not active
when the repeater mode is acti­
vated.
Registering repeaters at a base
station S 851-...
• Unplug the power supply unit at
the base station.
• Place ready all the repeaters you
wish to use in this system. For the
registration process, a line of sockets
with a sufficient number of con­
nections within a radius of no more
than 2 m from the base station is
required.
• Plug in the power supply unit at
the base station. The base station is
booting up; after around 1 minute
the LED flashes green. The base sta­
tion is in the registration mode for
around 2 minutes.
• Repeaters can be registered during
this period. Insert the repeater in the
socket. The LED "b" flashes green
for around 5 seconds and lights up
permanently after registration is
complete.
• Insert additional repeaters if
required, until all of them (max. 6)
have been registered.
• The base station switches off the
registration mode automatically after
around 2 minutes and is then ready
for operation.
• Determine the locations of the
repeater/repeaters, so that they
guarantee reliable function (LED "b"
green) and plug them in.
• The quality of the wireless signal is
signalled by the LED "b":
green: good signal
yellow: adequate signal
red: no signal
Servicing
Resetting repeaters to the as­deliv­
ered status.
Leave the repeaters plugged in and
hold down the reset button for
10 seconds.
Registering repeaters subse-
quently
If you wish to register additional
repeaters, all those already registered
must be functioning within a radius
of no more than 2 m from the base
station. Then all additional repeaters
are registered as described.
Specifications
Operating voltage:
100–240 V AC 50/60 Hz
Operating current: max. 50 mA
Protection system: IP 40
Protection class: II
Ambient temperature:
+5 °C to +40 °C
Dimensions (mm) W x H x D:
61 x 120 x 67