Environmental Information - Flymo Sabre Trim Instrucciones Originales

• Awareness of the environment must be
considered when disposing of ʻend-of-lifeʼ product.
• If necessary, contact your local authority for disposal
information.
• Your product is uniquely identified by a silver and black product rating label.
• We strongly recommend that your product is serviced at least every twelve months, more often in a professional
application.
If any part is found to be defective due to faulty
manufacture within the guarantee period,
Husqvarna UK Ltd., through its Authorised Service
Repairers will effect the repair or replacement to the
customer free of charge providing:
(a) The fault is reported directly to the Authorised
Repairer.
(b) Proof of purchase is provided.
(c) The fault is not caused by misuse, neglect or
faulty adjustment by the user.
(d) The failure has not occurred through fair wear
and tear.
(e) The machine has not been serviced or repaired,
taken apart or tampered with by any person not
authorised by Husqvarna UK Ltd..
(f) The machine has not been used for hire.
(g) The machine is owned by the original purchaser.
(h) The machine has not been used commercially.
* This guarantee is additional to, and in no way
diminishes the customers statutory rights.

Environmental Information

Service Recomendations
Guarantee and Guarantee Policy
ENGLISH - 2
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment.
By ensuring this product is disposed of correctly,
you will help prevent potential negative
consequences for the environment and human
health, which could otherwise be caused by
inappropriate waste handling of this product.
For more detailed information about recycling of this
product, please contact your local council office,
your household waste disposal service or the shop
where you purchased the product.
Failures due to the following are not covered,
therefore it is important that you read the
instructions contained in this Operator's Manual and
understand how to operate and maintain your
machine:
Failures not covered by guarantee
* Failures as a result of not reporting an initial
fault.
* Failures as a result of sudden impact.
* Failures as a result of not using the product in
accordance with the instructions and
recommendations contained in this Operator's
Manual.
* Machines used for hire are not covered by this
guarantee.
* The following items listed are considered as
wearing parts and their life is dependent on regular
maintenance and are, therefore not normally
subject to a valid warranty claim: Nylon Line, Spool
& Line
* Caution!
Husqvarna UK Ltd. does not accept liability
under the warranty for defects caused in whole
or part, directly or indirectly by the fitting of
replacement parts or additional parts that are not
either manufactured or approved by Husqvarna
UK Ltd., or by the machine having been
modified in any way.