Publicidad
Idiomas disponibles
Idiomas disponibles
←→℉ transition）.
D. Touch
or
in TIMER status to adjust time setting.
：touch this key to change fan running speed to High speed
5)
。
A.
Under COOL
and FAN
B.
Under TRY
mode, fan will be forced to run at low speed
C.
Fan speed will be unchanged if unit operated between COOL and Fan modes, that means if fan
running at low speed under FAN mode, the fan speed will keep same when unit changed to COOL
mode; if fan running at high speed under COOL mode, it would keep same when unit changed to
FAN mode.
D.
Fan will be forced running at low speed under Dehumidify and Sleep modes and fan speed can't be
adjusted.
：Touch this key to set unit auto turn-on /turn-off time, to check or cancel time setting.
6)
A.
This unit is designed with 24-hour timer,
digits are for minutes 00-60. You can increase or decrease half an hour each time by touching
to finish hour and minute setting.
B.
You can set unit AUTO OFF time when it is running. Or set unit AUTO ON time when unit is standby.
Once timer setting is OK,
off.
C.
You can touch
final time setting. And TIMER would be ineffective and
control panel or remote control to turn on or turn off the unit.
： Start SLEEP Function by touching
+
mode,
in LCD screen will be on; re-touch
Sleep function will be ineffective under FAN or DEHUMIDIFY mode.
+
：Turn on or turn off Auto-Swing by touching
7)
automatically when unit starts working, touch
screen will be off. Re-touch
again.
modes, fan running speed can be adjusted by below order,
will be lighting till the time you set is over and
again to re-set time when TIMER function is on. The TIMER is subject to the
+
together to turn on auto-swing,
、Medium speed or Low speed.
, temperature can't be adjusted.
first two digits are for hours 00-24, and last two
would be off if any operation from
+
in the same time under COOL or HEAT
+
to stop "Sleep" function,
+
. Horizontal louvers will swing
+
together to turn off auto-swing,
or
will be
will be off.
in LCD
in LCD screen will be on
Publicidad
