Toring Aller Id R Ecords; Inserting A Pause In The Dialing Sequence - GE 29582 Guia Del Usuario

5. When finished, press the STORE button. The screen displays MEMORY LOCATION.
6. Press the memory location number (0-9 or A, B, C) to store the number.
Example:
To store 1 123 555 1211 Al Smith, you would do the following:
1. Press 1; press the SKIP button; press 1; press 2; etc.
2. When finished, press the STORE button.
3. To enter the name, press 2; press the SKIP button; press 5 (three times); press the
SKIP button (two times); press 7 (four times); etc.
4. When finished, press the STORE button.
5. Press the memory location number (0-9 or A,B,C) to store.
Storing Caller ID Records
You can also store Caller ID records in memory. Rather than re-entering the
information the traditional way, you can store the record in a memory location or
quick dial button.
1. Use the SKIP or REPEAT button to scroll to the Caller ID record you want to store.
Press DIAL button to change the format (11 or 10 or 7 digits number format) as
desired.
2. Press the STORE button.
3. Press the memory location number (0-9 or A, B, C) to store the record.

Inserting a Pause in the Dialing Sequence

Press the REDIAL/PAUSE button to insert a delay in the dialing sequence of a stored
telephone number when a pause is needed to wait for a dial tone (for example after
you dial 9 for an outside line, or to wait for a computer access tone). Each pause is
represented as "P" on the display and counts as 1 digit in the dialing sequence.
28