ASROCK P4VM900-SATA2 Manual Del Usuario página 7

CAUTION!
1. About the setting of "Hyper Threading Technology", please check page 31
of "User Manual" in the support CD.
2. This motherboard supports Untied Overclocking Technology. Please read
"Untied Overclocking Technology" on page 22 for details.
3. Due to the chipset limitation, the actual memory size may be less than 4GB
for the reservation for system usage under Windows
Vista TM .
4. Although this motherboard offers stepless control, it is not recommended
to perform over-clocking. Frequencies other than the recommended CPU
bus frequencies may cause the instability of the system or damage the
CPU.
5. While CPU overheat is detected, the system will automatically shutdown.
Before you resume the system, please check if the CPU fan on the
motherboard functions properly and unplug the power cord, then plug it
back again. To improve heat dissipation, remember to spray thermal
grease between the CPU and the heatsink when you install the PC system.
6. Before installing SATAII hard disk to SATAII connector, please read the "SATAII
Hard Disk Setup Guide" on page 18 to adjust your SATAII hard disk drive to
SATAII mode. You can also connect SATA hard disk to SATAII connector
directly.
7. Power Management for USB 2.0 works fine under Microsoft
Vista TM / XP SP1 or SP2 / 2000 SP4.
8. Microsoft ® Windows ® Vista
have the latest driver, we will update it to our website in the future. Please visit
our website for Microsoft ®
ASRock website http://www.asrock.com
ASRock P4VM900-SATA2 Motherboard
®
TM driver keeps on updating now. As long as we
Windows ® Vista TM driver and related information.
XP and Windows ®
® ®
Windows
7 7 7 7 7