Charge The Battery - QIMMIQ DV360 4K Guía De Usuario

Power On / Off the camera
Turn on
Press and hold the "POWER" button for 2 seconds, the camera will
turn on.
Turn off
Press and hold the "POWER" button for 2 seconds, the camera will turn off.

Charge the battery

Before using the camera for the first time, fully charge the battery firs:
1. Connect DV360 camera to a computer (or other USB power source)
using the USB cable (provided).
2. If the camera is turned on during the charge, the charging LED on top is
red and the battery icon on the display is blinking.
3. A completely flat battery will take about 3.5 hours to be fully charged. The
charging LED will turn off when the battery is fully charged.
NOTE:
When the battery is low, some functions of the camera will be not
available, such as Wi-Fi function.
Make a video / Take a picture
Make a video
Video mode is set up by default.
Press «SHOOT» button once to start recording. Press again to stop the recor-
ding.
47