QIMMIQ DV360 4K Guía De Usuario página 59

Use only the battery recommended by the manufacturer.
If the battery overheats during charging, turn off the camera,
remove the battery and wait until it cools.
If a battery leaks inside the product, please contact the technical
service. If contact battery fluid with the skin, rinse thoroughly and
consult your doctor.
The memory card used is a micro SD or micro SDHC.
Please keep the memory card clean and dry.
When you insert the memory card into the camera, make sure it is well
positioned. Do not force memory card when you insert it.
Please format the memory card before first use
A photo or video taken with the product will be stored in the folder auto-
matically created on the memory card. Do not store any images or videos
from other devices. They would not be recognized.
Direct editing of data in the memory card is not recommended. Copy the
data in the disk of your computer before editing.
Please turn off the product before removing the memory card to avoid any
damage
Do not disconnect power or turn off the product during the firmware
update process. You could damage your camera permanently.
When using an airplane, follow the rules specified by the airline.
Due to manufacturing technology limitations, the LCD may have a few
bright or dead pixels. These pixels do not affect the quality of the photos
or videos.
If the LCD screen is damaged, please pay attention to the liquid crystal in
the display. If any of the following conditions occur, immediately take the
action recommended as indicated:
59