Installation - Commercial Electric 53811101 Manual De Uso Y Cuidado

installation

WarninG: Shut off the power at the circuit breaker or fuse panel before removing the old fixture.
Item 306112991/Model # 53811101 should be installed in 4 in. housings only.
Item 1003455821/Model # 53198101 can be installed in 5 in. and 6 in. housings.
1
Turning off the power
□
Make sure the power is turned off at the source to the
recessed can housing where the fixture will be installed.
□
Remove the existing bulb and trim, revealing the socket.
nOTe: Stick the replacement label on the inner wall of the recessed
housing before installation.
3
Connecting the cables
□
Plug the cable connector on the socket
adapter (B) into the connector on the LED
light module (A).
B
A
4
2
Connecting the socket
adapter
□
Screw the medium base (E26)
socket adapter (B) into the socket in
the recessed housing.
B
4
Pushing the LED light module
into the recessed can
□
Carefully push the LED light module (A) into
the recessed can housing until the trim is flush
with the ceiling surface.
nOTiCe: Select the preferred color temperature of the light before
pushing the LED light module into the recessed can housing.
A