Preparation Of The Printer - Canon TS 9000 Serie Guía De Inicio

Procedures below vary depending on iOS or Android. Select your operating system and proceed to its
procedure.
a Tap Settings on the HOME screen, and then tap
Canon_ij_XXXX on the Wi-Fi settings.
If Canon_ij_XXXX does not appear on the list, see
"Preparation of the Printer" below to operate the
printer, and then repeat step a.
b Tap the installed application software.
c Follow the on-screen instructions to register the
printer.
Follow the on-screen instructions to proceed
with the setup.
If you select Auto Select Conn. Method
(recommended) on the connection method
selecting screen, the appropriate connection
method is selected automatically depending on
your environment.
d Make sure that the following screen appears.
The connection with your smartphone is now complete. You can print from your
smartphone.
To print photos, load photo paper. Proceed to "Loading Photo Paper" on page 8.

Preparation of the Printer

on the printer's touch screen.
a Tap
b Tap the icon on the lower left of the HOME screen.
a Tap the installed application software.
b Follow the on-screen instructions to register the
printer.
If a message saying "Printer is not registered.
Perform printer setup?" does not appear, see
"Preparation of the Printer" below to operate the
printer, and then wait for a while until a message
appears.
Follow the on-screen instructions to proceed
with the setup.
The appropriate connection method is selected
depending on your environment.
c Make sure that the following screen appears.
c Tap Yes or No.
d Tap LAN settings > Wireless LAN > Wireless
LAN setup > Easy wireless connect.
e Tap Yes.
f Return to the operation of your smartphone.
7