Royal Prestige JU0024 Manual De Cuidado Y Uso página 18

18
HOW TO CLEAN SILICONE PARTS
Tip |
Clean the rotation wiper under running water.
Cómo limpiar las piezas de silicona
Thoroughly dry after cleaning. Before assembling the top-set, ensure that the silicone ring is
firmly inserted.
Note |
If the silicone ring is not firmly inserted, juice may leak from the bottom of the juicing bowl.
Consejo:
Lave la unidad giratoria bajo agua abundante. Séquela perfectamente después de lavarla.
Cleaning inside of the bowl
Please unscrew the cover on the bottom and clean inside.
After cleaning, make sure that protrusion part of gear is
placed on the outer part so it fits (connects) with the drum.
Sequence of assembly is in reverse order of disassembly.
20
EXTRACTOR DE JUGOS
ROYAL PRESTIGE®
Silicone Brush
CEPILLOS DE SILICONA
Pull out the silicone brush from
Saque los cepillos de silicona de la unidad giratoria para
the rotation wiper to clean.
limpiarlos. Después de lavarlos, insértelos en la ranura con la
After cleaning, insert into the slot
with the tail pointing down as
cola apuntando hacia abajo, como se muestra en la ilustración.
shown in the illustration.
Silicone Ring
ARO DE SILICONA
Remove the silicone ring from
Retire el aro de silicona del colador para limpiarlo. Después de
strainer to clean.
After cleaning, push in the silicone
limpiar, introduzca el aro con la superficie más pequeña viendo
ring.
hacia abajo.
TAPA
Smart Cap
Remove from the juice spout
Retire la tapa del canal de jugo para limpiarla. Después de
to clean.
limpiarla, inserte el tapón de silicona en la tapa y colóquela en la
After cleaning, attach the smart
canal de jugo.
cap to the smart cap silicone on
the juice spout.
HOW TO USE THE C
Tip |
The cleaning tool mak
Completely dry after c
Hold the cleaning tool wit
1
the strainer into the clean
Note |
Insert the strainer un
Under running water, rota
2
and the strainer in opposi
Thoroughly rinse the insid
3
the strainer under running
After cleaning, remove the
4
cleaning tool. Dry before s