Vacation Mode; Keypad Lock; Installer Mode - EQUATION TH50DPGRF Manual De Instrucciones

Temperature override
In AUTO mode, it is possible to correct the setpoint temperature using the
This temporary setting will be canceled at the next scheduled time range.
Example: It is Saturday at 10 am, the set temperature is 18°C, I can rise to 19°C using the
will automatically switch to 21°C at 12 pm.
Press AUTO (central key) to force a return to the programmed temperature without waiting for the next range.
Press "+1h" (right key) to limit the override period to one hour.

Vacation mode

This function allows you to program a constant temperature for a chosen number of days, in order to
reduce energy costs.
1 - Press MENU (left key) to enter programmation menu,
symbol and
2 - Press twice,
indication are fl ashing
3 - Press to validate,
displayed and the number of days is fl ashing
4 - Set the number of days using
5 - Press to validate,
displayed and the temperature is fl ashing
6 - Set the desired temperature using
7 - Press to validate, the remaining number of days will change every day at midnight
8 - To cancel, press MENU (left key), then press

Keypad lock

1 - Keep pressing MENU (left key) and
simultaneously for 5 seconds to lock the keypad. The
symbol is displayed.
2 - Proceed in the same way to unlock.
Optimum start
This Thermostat has optimisation functions that aim to
save energy while maintaining suitable comfort levels.
The thermostat learns how long it takes your home to
reach a set temperature and then turns the heating on a bit
earlier to achieve that temperature at the programmed time.
By default optimisation is disabled, see instructions in installer mode on how to
activate it.
The Thermostat displays

Installer Mode

The thermostat is factory set to control a gas boiler.
Installer Mode allows you to modify these factory settings respecting the below values.
Applications
Gas boiler (<30 kW)
Oil boiler - Heat pump
Pellet stove
indication are fl ashing
symbol and
indication is
and keys
indication is
et keys
to validate
(right key)
during the optimisation period if set.
Cycles / hour
6
3
and
1
5s
mini ON time Settings to change
1 min No change
Parameter 3OT on 4
4 min
Parameter 2CR on 3
keys.
key, and it
1
FR
ES
PT
IT
EL
PL
UA
RO
EN
83