Flash And Call Waiting; Storing A Phone Number In Memory - memorex MPH 6928 Manual De Instrucciones

Color profile: Disabled
Composite Default screen
NOTE
Whenever you are using a
menu screen, you must press
a key within 20 seconds or
the phone will return to
standby. You may also press
MEM to exit a memory
menu at any time.
HINT
The character menu consists
of letters, symbols, and
numbers.
NOTE
The pause button counts
as one digit. Pressing
more than
PAUSE
once increases the length
of pause between numbers.
22
C:...MPH6928 VA OM.vp
Mon Feb 14 15:27:39 2000

FLASH AND CALL WAITING

If you have "call waiting" service
and a call waiting tone sounds
while you are on a call, press
to accept the waiting call.
FLASH
There is a short pause, then you
will hear the new caller. To return
to the original caller, press
again.
FLASH

STORING A PHONE NUMBER IN MEMORY

1) Remove the handset from the base.
2) Press and hold for two seconds.
MEM
The following screen appears.
3) Use the : and ; keys or number keypad to choose the memory
location where you would like to enter a number.
4) Press . The following screen appears,
SELECT
and a cursor flashes indicating that the
display is ready for the name to be entered.
5) Use the : and ; keys to scroll through the character menu. Use the
< and > keys to move the cursor to the desired location, and enter the name.
6) If you make a mistake, press
entered. Or press and hold
7) Press . The following screen
SELECT
appears, and a cursor flashes indicating
that the display is ready for the number.
8) Enter the phone number with the handset keypad.
When entering numbers, press
pause in the dialing sequence. The display shows
a P. The pause feature is useful for long distance
NOTE
calling, credit card dialing, or sequences requiring
a pause between digits.
Memory Store
1>
2
Store Name
T
to erase the character you just
DELETE
to erase the entire line.
DELETE
Store Number
T
PAUSE
to enter a