Editing A Phone Number In Memory - memorex MPH 6928 Manual De Instrucciones

Color profile: Disabled
Composite Default screen
NOTE
Whenever you are using a
menu screen, you must press a
key within 20 seconds or the
phone will return to standby.
You may also press MEM to
exit a memory menu at any
time.
NOTE
If you select Go Back
at any time, no changes are
made and the handset
shows the Memory
Store screen.
C:...MPH6928 VA OM.vp
Mon Feb 14 15:27:40 2000
9) Press . The handset beeps and
SELECT
displays a confirmation screen. For
example, if you store a name and number
into memory location number one, the
display shows
Memory 1 Stored
10)Press or return the handset to the charging cradle to exit store
MEM
mode. Or, wait 20 seconds for the phone to return to standby.

EDITING A PHONE NUMBER IN MEMORY

Follow these steps to edit a phone number that you have already
programmed into memory.
1) Remove the handset from the base.
2) Press and hold for two seconds.
MEM
The display shows the Memory Store
screen and any saved numbers.
3) Use the : and ; keys or number keypad to select the memory
location you would like to edit. The < and > keys toggle between the
names display and the numbers display.
4) Press . The following screen appears
SELECT
with the memory location number that
you have selected in the display
You may move the > cursor down to
press
NOTE
SELECT
5) With > cursor next to
Edit Memory
press . The following screen
SELECT
appears, and a cursor flashes indicating
that the display is ready for the name to
be edited.
6) Use the : and ; keys to scroll through the character menu. Use the
< and > keys to move the cursor to the desired location, and enter the name.
Memory 1 Stored
.
Memory Store
1> KAYSIE SCHLITZ
2 MEMOREX
> Edit Memory 1
Delete Memory 1
Go Back
Go Back
if you would like to exit this menu.
,
and
23