Echo REPOWER 90083 Instrucciones De Instalación página 2

2
11. Loosen the four (4) bolts (E) and remove locator bolt (F) on cutting
attachment.
12. Align ridges on aluminum shaft tube (G) with seams in cutting
attachment. Join star shaped drive end of inner power transmis-
sion shaft (H) with cutting attachment square shaft (I).
13. Slide together aligning locator hole (F) in cutting attachment with
locator hole in aluminum shaft tube.
14. Install and tighten locator bolt (F). Tighten four (4) cutting
attachment bolts (E).
F
G
H
I
F
E
E