Connecting A Dvd Player/Set-Top Box Via Hdmi; Connecting An Amplifier/Dvd Home Theater - Samsung PL-42C91HP Instrucciones Del Propietario

Connecting a DVD Player/Set-Top Box via HDMI

This connection can only be made if there is an HDMI Output jack on the external device.
TV Rear Panel (PL-42Q91HP/50Q91HP)
1
HDMI Cable (Not supplied)
What is HDMI?
• HDMI, or high-definition multimedia interface, is a next-generation interface that enables
the transmission of the digital audio and video signals using a single cable without
compression.
• "Multimedia interface" is a more accurate name for it especially because it allows
multiple channels of digital audio (5.1 channels).
The difference between HDMI and DVI is that the HDMI device is smaller in size, has
the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and
supports multi-channel digital audio.
➢
Each DVD player/Set-top box has a different back panel configuration.
➢
When connecting a DVD player/Set-top box, match the color of the connection terminal to the cable.
➢
When connecting via HDMI, you do not need to connect Audio Cables. You only need to connect Audio
cables when connecting via HDMI/DVI.
➢
If no video signal, turn Off your DVD player/Set-top box and turn it On again.

Connecting an Amplifier/DVD Home Theater

Amplifier/DVD Home Theater
1 Audio Cable (Not supplied)
➢
Each Amplifier/DVD Home Theater has a different back panel configuration.
➢
When connecting an Amplifier/DVD Home Theater, match the color of the connection terminal to
the cable.
➢
The illustration for connecting jacks on the rear shown in this manual has been created based on the
PL-42C91HP model. Even though the jack configuration is different from your model, the connection
method is the same as in the illustration.
TV Rear Panel (PL-42C91HP/50C91H/42C71HP)
DVD Player/Set-Top Box
1
HDMI Cable (Not supplied)
TV Rear Panel
English-13
1. Connect an HDMI Cable
between the HDMI/DVI IN
(or HDMI IN 1, 2) on the TV
and the HDMI OUT on the
DVD player/Set-Top Box.
1. Connect Audio Cables
between the AUDIO OUT
[R-AUDIO-L] on the TV
and AUDIO IN on the
Amplifier/DVD Home
Theater.
When an audio amplifier is
connected to the "AUDIO
OUT [R-AUDIO-L]"
terminals: Decrease the
gain (volume) of the TV,
and adjust the volume level
with the Amplifier's volume
control.