Setting The Home Theater Pc - Samsung PL-42C91HP Instrucciones Del Propietario

Changing the Screen Position
After connecting the TV to your PC, adjust the position of the screen if it is not well-aligned.
➢
Change to the PC mode first.
T V PC
Image Lock
Position
Auto Adjustment
Image Reset
Move Enter
T V Position
Move Enter
Initializing the Screen Position
➢
Change to the PC mode first.
T V PC
Image Lock
Position
Auto Adjustment
Image Reset
Move Enter
Image Reset is completed.

Setting the Home Theater PC

You can view higher quality pictures by configuring the screen settings in PC Mode. If you set the Home Theater PC function to On,
you can configure the Detailed Settings (when Picture Mode is set to Standard or Movie) as in PC Mode.
T V Setup
More
PC
Home Theater PC : Off
Light Effect : Standby Mode On
Energy Saving : Off
Screen Burn Protection
HDMI Black Level : Normal
More
Move Enter
T V Setup
More
PC
Home Theater PC : Off
Light Effect : Standby Mode On
Energy Saving : Off
Screen Burn Protection
HDMI Black Level : Normal
More
Move Enter
1. Press the MENU button to display the menu.
Press the ... ... or † † button to select "Setup", then press the ENTER button.
Press the ... ... or † † button to select "PC", then press the ENTER button.
2. Press the ... ... or † † button to select "Position", then press the ENTER button.
Return
3. Press the ... ... or † † button to adjust the V-Position.
Press the œ or √ button to adjust the H-Position.
Press the ENTER button.
Press the EXIT button to exit.
Return
1. Press the MENU button to display the menu.
Press the ... ... or † † button to select "Setup", then press the ENTER button.
Press the ... ... or † † button to select "PC", then press the ENTER button.
2. Press the ... ... or † † button to select "Image Reset", then press the ENTER button.
The message "Image Reset is completed." appears on the screen.
Press the EXIT button to exit.
➢
Return The previously adjusted settings will be reset to the factory defaults.
1. Press the MENU button to display the menu.
Press the ... ... or † † button to select "Setup", then press the ENTER button.
2. Press the ... ... or † † button to select "Home Theater PC", then press the ENTER
button.
Return
3. Press the ... ... or † † button to select "Off" or "On", then press the ENTER button.
Press the EXIT button to exit.
➢
Off
This function is available only in PC mode.
On
Return
English-37