ASROCK K10N78-1394 Manual De Instalación página 29

Tabla de contenido

Publicidad

eSATAII Connector
(eSATAII_TOP: see p.2, No. 36 or p.3, No. 35)
Serial ATA (SATA)
Data Cable
(Optional)
Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA
HDD power connector
USB 2.0 Headers
(9-pin USB8_9)
(see p.2/3 No. 14)
(9-pin USB6_7)
(see p.2/3 No. 15)
USB/WiFi Header
(11-pin USB/WIFI)
(see p.2/3 No. 27)
ASRock
This eSATAII connector
supports SATA data cable for
external SATAII function. The
current eSATAII interface
allows up to 3.0 Gb/s data
transfer rate.
Either end of the SATA data cable
can be connected to the SATA /
SATAII hard disk or the SATAII
connector on this motherboard.
For K10N78-1394, you can also
use the SATA data cable to
connect SATAII_6 (PORT5)
connector and eSATAII
connector.
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
connect to the
power cable to the power
power supply
connector of the power supply.
Besides six default USB 2.0
ports on the I/O panel, there are
two USB 2.0 headers on this
motherboard. Each USB 2.0
header can support two USB
2.0 ports.
This header can be used to sup-
port 2 USB 2.0 ports. It can also
be used to support WiFi+AP
function with ASRock WiFi-802.
11g or WiFi-802.11n module, an
easy-to-use wireless local area
network (WLAN) adapter. It all-
ows you to create a wireless
K10N78-1394 / K10N78
Motherboard
2 9
2 9
2 9
2 9
2 9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

K10n78

Tabla de contenido