Night Light Function - Phocos CMLNL Manual De Instrucciones

The percentage corresponds to the available energy until Low
Voltage Disconnect in relation to a fully charged battery.
Load status display
In case of deep discharge or overload/short-circuit of load, the
load output is switched off. This is indicated by:
Overload or
Normal operation Low voltage
Short-circuit of load
(LED off) disconnect (LED on)
(LED flashing)

Night light Function

The charge controller has a load terminal which is prepared for
nightlight operation and switches on for a selectable number of
hours from the dusk. Dusk is recognized of the open circuit voltage
of the solar array is lower than the setting of the controller.
There are 2 modes available.
Dusk to Dawn and Evening Mode. The mode can be selected in
Programming Menu 1.
If EVENING mode is selected. Programming Menu 2 allows choosing
the EVENING timing hours.
Mind that the load output is switched off as soon as the battery
27