Installing Safety Belt (Acc 322 Sold Separately) - PEERLESS Paramount PS200 Instalación Y Montaje

Note: Support arms (A) can be extended by loosening two phillips screws under each arm as shown in fi gure
5
5.1. Extend arm to desired position and retighten screws before placing component onto mount.
Place component (DVD player, amplifi er, etc.) onto support arms (A) of mount.
• Always use an assistant or mechanical lifting equip-
ment to safely lift and position items onto support
arms.
fi g 5.1
Installation of Safety Belt
Wrap safety belt (F) around component as shown in fi gure 6.1. Position belt close to the back of the component be-
6
ing secured (in line with the back feet) as shown in fi gure 6.2.
Insert loose end of safety belt into the buckle end as shown in fi gure 6.3. Pull to tighten securely.
fi g 6.1
WARNING
A
PHILLIPS SCREWS
fi g 6.3
fi g 5.2
fi g 6.2
SAFETY BELT
F
7 of 21 ISSUED: 06-08-07 SHEET #: 083-9004-4 05-25-10
All other brand and product names are trademarks or registered trademarks of their respective owners.
DVD PLAYER,
AMPLIFIER, ETC.
A
SAFETY BELT
© 2007, Peerless Industries, Inc. All rights reserved.