Iqua BHS-801 Manual Del Usuario página 10

BHS-801_Headset_UG_en_2.fm Page 8 Monday, September 25, 2006 2:20 PM
Using the stereo headset
See pictures on page 2 for reference with the following instructions 1 to 3.
1. Remove the earhook from the headset body.
2. Connect the earpiece adapter to the headset body.
3. Connect the stereo earpiece set to the adapter.
4. You can modify the length of the neck strap by sliding the wire stopper up and down. See
fig 1 below.
5. Wear the neck strap around your neck and place the earpieces in your ears.
See fig. 2 below.
Fig 1.
Movable wire stopper
Fig 2.
8