Iqua BHS-801 Manual Del Usuario página 7

BHS-801_Headset_UG_en_2.fm Page 5 Monday, September 25, 2006 2:20 PM
3. To pair with the phone, enter the PIN code for the headset, which is 0000. After pairing,
the headset may try to connect with your phone automatically or you may have to
activate the connection manually from the phone menu.
4. Once pairing has been successfully completed, you will hear a low to high tone and a
green light will start flashing at a long interval. The headset is now ready for you to make
and receive calls. If the pairing has not been completed, you will hear a high to low tone
and the green light will start flashing at a short interval.
To cancel pairing after entering pairing mode, press and hold down the Call button until the
green and red light are no longer flashing.
To reset and clear the headset's pairing list, switch the headset off and press and hold down
the and buttons for five seconds. You will hear a beep and the red light flashes twice.
For the latest compatibility information, please visit www.iqua.com.
5
EN