Manual Pairing - Rotorbike ROTOR Power Guía Rápida

AUTOMATIC PAIRING
Make sure you are at least 10 meters (30 feet) away
from any other ANT+ Power sensor device: TM
1. Start the power meter system by riding a few
meters until the red LED starts flashing.
The system turns on when a 1,5 Kg force is
applied to the cranks
2. Push the "SCAN" button on your ANT+ device
aon the ANT+ Power screen. TM
(Menu: Settings\Bike settings\bike profiles\"your profile"\
ANT+ Power)
ROTOR Power retains its "SENSOR ID" throughout
battery replacements and will remain properly paired.
.
TM
Power meter

MANUAL PAIRING

Introduce ROTOR Power "SENSOR ID" into the
ANT+ device; "SENSOR ID" can be found on the TM
inside of the drive side crank, It is the last 5 digits of
the number shown. It is also Identity Card included
within the package.
I.E.: SENSOR ID_ 02310
SENSOR
ID_ 02310
QUICK GUIDE - PAIRING
LED
PRODUCT ID CARD
SENSOR ID
02310
QC DATE
Register your ROTOR Power at power.rotorbike.com/registration
www.rotorbike.com
ES
EN
04