HAMPTON BAY 201-014 Manual De Instrucciones página 7

INSTALLATION INSTRUCTIONS (CONT.):
5. Carefully tuck all wire connections into the Outlet Box (#6). Place
the Fixture Pan (#1) onto the desired location, making sure that the
halfway threaded Mounting Screws (#8) feed through the large
openings of the Keyhole Slots (#16). Slide the Fixture Pan (#1) so
that the Mounting Screws (#8) slide into the narrow slots of the
Keyhole Slots (#16). Tighten the Mounting Screws (#8) down to
secure the Fixture Pan (#1) in place. (Fig. 5 & 5-1)
6. Proceed to Step 3 of the Assembly Instructions.
7. Installation is complete. Turn on power at the circuit breaker or fuse
box. Turn the light switch on to activate the fixture.
Page7