Important Safety Instructions - Fellowes POWERSHRED P-20 Manual De Usario

Shredder head
Paper entry
Sheet capacity icon
Bin
SET-UP
Place shredder head securely on top of bin.
CAPABILITIES
Will shred: Paper only
Will not shred: Continuous forms, adhesive labels, transparencies,
newspaper, cardboard, paper clips, laminates or plastic other than
noted above
Paper shred size:
Strip-Cut ...........................................................................................7mm
IMPORTANT SAFETY INSTRUCTIONS –
paper entry. Always set to off or unplug when not in use.
Never use aerosol products, petroleum based lubricants or other
flammable products on or near shredder. Do not use canned air
on shredder.
shredder. Do not place near or over heat source or water.
covered in the instruction manual. Read the entire instruction
manual before operating shredders.
2
Maximum:
Sheets per pass (Cross-Cut) ................................................................... 5*
Paper entry width ......................................................................... 220mm
*70g A4 paper at 220-240v, 50Hz, 0.6Amps; heavier paper, humidity or other
than rated voltage may reduce capacity. Recommended daily usage rates:
10-20 paper passes.
Read Before Using!
voltage and amperage designated on the label. The outlet
cords should not be used with this product.
chips or batteries.
ENGLISH
Model P-20
See safety instructions below
Control switch
Auto-On (I)
Off (O)
Reverse (R)