How To Order - Cequent Fulton Instrucciones

Cabrestantes para remolque
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Let Line/Load Out:
Before turning the handle, firmly grip the winch handle and disengage the ratchet pawl or engage
it in the reverse direction. You may have to take in a small amount of line to allow the ratchet
pawl to unload. With a firm grip on the winch handle, slowly let out line. If you must stop be-
fore the load is fully out, be sure the ratchet pawl is engaged in the forward or loading position
and gradually release the winch handle to be sure the ratchet pawl is holding the load.
Take Line/Load In:
Be sure the ratchet pawl is engaged in the forward or loading position. As you turn the handle,
make sure the cable, strap, or rope is winding onto the drum properly. If you must stop before
the load is fully in, be sure the ratchet pawl is engaged and gradually release the winch handle to
be sure the ratchet pawl is holding the load.
Braking (Winches Equipped with Optional Hand Brake):
Apply the brake to help control the load by pressing down on the hand brake lever. Do not let go
of the winch handle while letting line out, and do not attempt to stop a spinning winch handle.
Shifting (2-Speed Winches Only):
Make sure that the ratchet pawl is properly engaged and holding the load before attempting to
change gears. T3700 winches change gears by relocating the winch handle onto a different input
shaft. Other 2-speed winches shift by disengaging the shift lock lever, sliding the input shaft,
and reengaging the shift lock lever. The shift lock lever must be firmly in place in an inner or
outer groove on the input shaft during winch operation. Inner and outer grooves, drive gear is
engaged, center groove is neutral.
Winch Information Chart
Capacity
Fulton
Gear Ratio
(1)
Part No.
SINGLE SPEED WINCHES
600 lbs.
T600
3.1:1
T900
3.1:1
900 lbs.
T903
3.1:1
1100 lbs.
T1100
4.1:1
1300 lbs.
T1300
4.1:1
1400 lbs.
XLT14
4.1:1
1500 lbs.
T1500
4.1:1
1600 lbs
T1602
5.1:1
T1801
5.1:1
1800 lbs.
XLT18
5.1:1
2100 lbs.
T2100
5.1:1
TWO SPEED WINCHES
T2005
4.1:1 & 9.8:1
2000 lbs.
T2025
4.1:1 & 9.8:1
T2605 5.1:1 & 12.2:1
2600 lbs.
T2625 5.1:1 & 12.2:1
3200 lbs.
T3205 5.1:1 & 12.2:1
3700 lbs.
T3700 5.1:1 & 12.2:1
(1) Capacity is based on direct line pull on first layer of the line on the drum. Capacity is reduced as line builds up on the drum as defined on the
frame.
(2) Maximum Mechanical Advantage is based on first layer of recommended line on the drum. For maximum efficiency use only the amount of
line required.
(3) Only winches that are shown to accommodate steel cable can use steel cable. Winches designed for steel cable have a larger drum hub to reduce
the bending fatigue of the cable and extend the cable life. Neatly wrapping the cable is necessary to reduce the chance of kinking or fraying.
Use only Cequent Performance Products' parts or parts of equal quality for repair. Replacement parts are available through Cequent Performance
Products' Customer Service Department, 1-800-632-3290. Please specify product model number.
Limited Warranty. Cequent Performance Products, Inc. ("We" or "Us") warrants to the original consumer purchaser only ("You") that the product
will be free from material defects in both material and workmanship for a period of five years, ordinary wear and tear excepted; provided that in-
stallation and use of the product is in accordance with product instructions. There are no other warranties, express or implied, including the war-
ranty of merchantability or fitness for a particular purpose. If the product does not comply with this limited 5 year warranty, Your sole and exclu-
sive remedy is that We will replace the product without charge to You and within a reasonable time or, at our option, refund the purchase price.
This warranty is not transferable.
Limitations on the Warranty. This limited warranty does not cover: (a) normal wear and tear; (b) damage through abuse, neglect, misuse, or as a
result of any accident or in any other manner; (c) damage from misapplication, overloading, or improper installation, including welds; (d) improp-
er maintenance and repair; and (e) product alteration in any manner by anyone other than Us, with the sole exception of alterations made pursuant
to product instructions and in a workmanlike manner.
Obligations of Purchaser. To make a warranty claim, contact Us at 47912 Halyard Dr. Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify
the product by model number, and follow the claim instructions that will be provided. Any returned product that is replaced or refunded by Us
becomes our property. You will be responsible for return shipping costs. Please retain your purchase receipt to verify date of purchase and that
You are the original consumer purchaser. The product and the purchase receipt must be provided to Us in order to process Your warranty claim.
Remedy Limits. Repair or replacement is Your sole remedy under this limited warranty or any other warranty related to the product. We shall not
be liable for service or labor charges incurred in removing or replacing a product or any incidental or consequential damages of any kind.
Assumption of Risk. You acknowledge and agree that any use of the product for any purpose other than the specified use(s) stated in the product
instructions is at Your own risk.
Governing Law. This limited warranty gives You specific legal rights, and You also may have other rights which vary from state to state. This
limited warranty is governed by the laws of the State of Michigan, without regard to rules pertaining to conflicts of law. The state courts located in
Oakland County, Michigan shall have exclusive jurisdiction for any disputes relating to this warranty.
We declare under our sole responsibility that the Trailer Winch is in conformity with EN-
12100-2:2003 Safety Machinery; Machinery Directive 98/37/EC.
Operation
Max.
Handle
Ratchet Pawl
Mech.
Length
Style
Adv. (2)
6"
34:1
Two-way
7"
39:1
Two-way
7"
39:1
Two-way
7"
43:1
Two-way w/neutral 30' x 5/16"
8"
49:1
Two-way w/neutral 30' x 5/16"
8"
43:1
Two-way
8"
49:1
Two-way w/neutral 20' x 5/16"
9"
56:1
Two-way
10"
62:1
Two-way
10"
62:1
Two-way
10"
62:1
Two-way
10"
87:1
Two-way w/neutral 20' x 7/16"
10"
64:1
Two-way w/neutral
10"
108:1
Two-way w/neutral 24' x 7/16"
10"
79:1
Two-way w/neutral
10"
79:1
Two-way w/neutral
10"
102:1
Two-way

How to Order

Limited Five Year War ranty
One-Way
Two-Way
One-Way
Two-Way
Drum Storage
Rope
Steel Cable (3)
36' x 1/4"
N/A
36' x 1/4"
N/A
36' x 1/4"
N/A
N/A
N/A
N/A
N/A
N/A
20' x 7/16"
N/A
20' x 7/16"
N/A
N/A
N/A
20' x 7/16"
N/A
N/A
N/A
50' x 7/32"
N/A
N/A
100' x 7/32"
N/A
100' x 7/32"
N/A
185' x 7/32"
Ratchet Pawls Disengaged
Two-Way
With Neutral
Ratchet Pawl
Ratchet Pawls Engaged
Two-Way
With Neutral
Strap Bolt Size,
where applicable
Strap
(not included in all models)
15' x 2" 1/4" x 2-1/2" Grade 5
15' x 2" 1/4" x 2-1/2" Grade 5
12' x 2" 1/4" x 2-1/2" Grade 5
20' x 2" 1/4" x 2-1/2" Grade 5
20' x 2" 1/4" x 2-1/2" Grade 5
20' x 2" 5/16" x 2-1/2" Grade 5
20' x 2" 1/4" x 2-1/2" Grade 5
20' x 2" 3/8" x 2-3/4" Grade 5
20' x 2" 3/8" x 2-3/4" Grade 5
20' x 2" 3/8" x 2-3/4" Grade 5
20' x 2" 3/8" x 2-3/4" Grade 5
N/A
3/8" x 2-3/4" Grade 5
N/A
Cable only (3)
N/A
3/8" x 3-1/2" Grade 5
N/A
Cable only (3)
N/A
Cable only (3)
N/A
Cable only (3)
47912 Halyard Dr. Suite 100
Plymouth, MI 48170 USA
800/632-3290
www.cequentgroup.com

Publicidad

Tabla de contenido
loading

Tabla de contenido