Take Out And Install The Ice Maker - Telstar TRX596310MD Manual De Instrucciones

Refrigerador automático
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Automatic Refrigerator
TRX596310MD
turn the handle from the horizontal position to vertical position to release the lock (as shown in Fig. 1 of Pg. 34),
pull it out (as shown in Fig. 2 of Pg. 34) and take out the ice cube box.
Rinse the ice cube box with warm water (below 60°C) and don't use detergent.
Dry the ice cube box completely in air in case that water droplets in the ice cube box might cause abnormal
functioning of the ice maker.
When the ice maker can't move, separate the ice maker as shown in Fig. 1 and Fig.2. Then install after ice
cubes are melted.
Insert the ice cube box onto the rack according to original sequence and rotate to the locked position.

• Take out and install the ice maker

When the ice maker isn't used, it could be taken out and the vacated space could be used as a part of the
freezer compartment.
Push the Ice Maker button on the control panel at the refrigerator door and the icemaking sign disappears.
Open the door and take out the drawer.
Pull the ice-maker out (as shown in Fig.1), and then downwards, so that the ice maker is unhooked (as shown
in Fig. 2).
Pull down the ice maker's power plug so that it is detached from the ice- maker's power socket (as shown in
Fig. 3)
Install the ice maker into the original position, push the Ice Maker button, the ice-making symbol appears.
37

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido