Door Handles - Telstar TRX596310MD Manual De Instrucciones

Close the door after the ice maker is installed to the proper place, otherwise, it might damage the ice maker.

DOOR HANDLES

Making minor adjustments between doors
Assembly instructions of cold storage door handle:
1. Firstly, take the handle set bolts out from the refrigerator, use cross recessed screwdriver to set the bolt
on the door. Fix it tight with all the screw thread twisted through the hole, as shown in the figure;
2. After the first step is completed, take the Cold storage door handle out from the box, place it as per
the direction shown in the figure (Note: i.e. the direction which both screw holes on the handle are close
to the edge), and hang the handle above the set bolt;
3. Use the small hexagon spanner supplied in the box to set the handle fixing socket head cap screws
into both the small screwed holes on the handle. After they are screwed down, gently shake the handle,
so as to confirm that the handle is well erected.
38
Automatic Refrigerator
TRX596310MD