Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Part 2. Installation
Installation Instructions
The appliance must be installed and connected in
accordance with current regulations.
After unpacking the appliance, ensure there is no
visible damage. If it has been damaged during transit,
DO NOT USE, contact where you buy immediately.
Selection of installation equipment
-Cut out the work surface according to the sizes shown in the drawing.
-For the purpose of installation and use, a minimum of 5 cm space shall
be preserved around the hole.
-Be sure the thickness of the work surface is at least 30mm. Please select
heat-resistant work surface material to avoid larger deformation caused
by the heat radiation from the hotplate. As shown below (measure by
unit: mm):
Model
MV 1601
MI 1500
Free cook
Under any circumstances, make sure the electric hob is well ventilated and the air
inlet and outlet are not blocked. Ensure the electric hob is in good work state. As
shown below:
L
W
590
520
52
590
520
56
H
D
A
48
555+5
52
555+5
10
B
495+5
-0
-0
495+5
-0
-0
X
50 mini
50 mini
Publicidad
Tabla de contenido
