meireles MV 1601 Manual Del Usuario página 21

Flexible Areas-Induction Hob
Some of models might have one or several Flexible cooking areas. These Flexible
cooking areas can each be used as a single zone or as two independent zones,
accordingly to the cooking needs anytime.
Flexible areas are each made of two independent inductors that can be controlled
separately. When working as a single zone, a cookware is moved from one zone to
the other one within the flexible area keeping the same power level of the zone
where the cookware originally was placed, and the part that is not covered by
cookware is automatically switched off.
Important: Make sure to place the cookwares centered on the single cooking
zone. In case of big pot,oval,rectangular and elon- gated pans make sure to place
the pans centered on the cooking zone covering both cross.
Active the flexible induction area
To activate a flexible area as a single big zone, first press either of the two cooking
zone selection buttons of this flexible area, then press the
flexible area control button. When flexible area works, the indicator above
corresponding flexible area control button lighting, the power level indicator
flashing, you can adjust power level of the flexible area by slide the slider.
Inactive the flexible induction area
To in active the flexible area when it works, press either of the two cooking zone
selection buttons of this flexible area, when power level indicator flashing, press
the flexible control button again. The indicator will off after inactive it.
21