Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

22

location of the unit

• Before using the show case, re-
move all packaging material in-
cluding bottom cushion and
foam pads and tapes inside the
show case, tear off the protec-
tive film on the door and body
of the appliance.
• Keep the appliance away from
heat and avoid direct sunlight.
Do not place the show case in
moist or humid places to pre-
vent rust or a reduction of its
insulating performance.
• The unit should be placed in a
well-ventilated indoor place.
The floor should be flat and
sturdy enough.
• There should be the following
minimum clearances around
the unit: 70 cm minimum above
the unit, and 20 cm minimum
to both sides and the back.
Clearances allows opening and
closing the door as well as a
proper heat dissipation.
70 cm
20 cm
20 cm
• Wipe the inside and outside
surfaces of the appliance with a
warm damp cloth (you may add
a small amount of detergent in
the warm water). Use a cloth
dampened in clear water for
the final rinse.
• The unit must stand for 30 min-
utes before connecting it to the
power supply, before turning it
on for the first time.
• The unit must run 2 to 3 hours
before loading fresh or frozen
foods. The show case must run
for more than 4 hours in sum-
mer in advance considering
that the ambient temperature
is higher.
• It is normal to find condensa-
tion water on the surface of
glass and the top of outlet
housing during use. Remove it
with a dry cloth.

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Mag316baflww

Tabla de contenido