Introduction; Setting Up - Adam ATP Manual Del Usuario

EN

1. INTRODUCTION

• The Adam Thermal Printer is a general purpose thermal tally
roll printer specifically designed to work with the Adam series
of balances.
• The printer comes preset to work with the default RS-232
interface found on the Adam balances but can easily be
changed to work on other equipment as well.
• The printer is easy to use with only an On/Off switch and a
paper feed button.

SETTING UP

2.
CAUTION:
IMPORTANT
Clean the print head regularly to avoid poor print quality, only attempt to clean
when the printer is off and the head has had time to cool. Clean with a soft
cloth using diluted alcohol.
© Adam Equipment Company 2016
Avoid extremes of temperature. Do not place in direct sunlight
or near air conditioning vents.
Avoid unstable power sources. Do not operate near large
users of electricity such as welding equipment or large
motors.
Avoid high humidity that might cause condensation, and keep
away from direct contact with water.
3 3126611270RevB2-Nov12