AquaScape DIY Pond Kit Manual De Instrucciones página 14

STEP 5
CONT...
EXCAVATE YOUR POND BASIN CONTINUED
Leveling the edges
• One of the most important parts of the excavation is
getting the perimeter of the pond level and setting the level
of the water. An excellent tool for this is a 2x4 set across
the pond. Set a 4-foot bubble level on the 2x4 to make
sure the perimeter of the pond is level. We recommend
using a transit or sight level on larger projects. Check your
progress several times while digging.
• It is typical to set the water level 2- 3" below the main
viewing area (patio, deck, etc.). This will bring the water
14
level of the pond up close to the edge of the pond without
going over the sides. (See Ex. 11)
Ex. 11
• Rough out an excavated area for the Skimmer. Simply dig
a hole 18" wide by 21" long (the outline of the skimmer)
and 18" below the desired water level.
• Make sure the excavated
area under the Skimmer
is compacted and level.
www.aquascapeinc.com
Viewing Area
(Patio, Deck or Lawn)
2" to 3"