AquaScape DIY Pond Kit Manual De Instrucciones página 23

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

STEP 13
BUILD THE WATERFALL
• Make sure there is at least 2 feet of liner on either side of
the MicoFalls
. (See Ex. 30)
®
• Place two larger boulders on either side of the waterfalls
you are creating in order to "frame" the waterfalls. The
water will be running between the two larger boulders
you've set in place. (See Ex. 30)
• You can now begin to stack the rocks between the two
larger boulders. These are the rocks that the water will be
running over, so take your time and be creative. Start with
the larger rocks on the bottom and work your way up to
the smaller ones on top. (See Ex. 31)
Biofall Filter
Biological Media net to hold
BioBalls
or Lava Rock (BioBalls
and lave rock sold separately)
Two standard biological fi lter mats
Rock tray (not included) can hold
rocks, plants, and gravel, helping
to naturalize the fi lter into the
surrounding landscape.
CAN 1-866-766-3426 |
• Small stones and gravel can be used to fi ll in the
gaps between the larger waterfalls stones.
2 feet
Liner
Rock
Ex. 30
Ex. 31
Get creative with the rock placement.
US 1-866-877-6637
2 feet
Liner
Rock
23

Publicidad

Tabla de contenido
loading

Productos relacionados para AquaScape DIY Pond Kit

Tabla de contenido