Foundations LX3 Instrucciones De Montaje Y Uso página 17

Stroller Operation & Use (continued)
Canopy Operation (continued):
To attach canopy (continued):
3.
Secure short Rear Canopy Tube (short tube)
by pushing end of Canopy Tube into Canopy
Retainer slot located on outside of the handle
near the top of the back seat (Fig. 6).
Repeat steps 2 and 3 to secure canopy tubes
on other side of stroller.
4.
Secure back of canopy.
- Fold back panel of canopy forward
pull rear canopy tube rearward and
attach canopy fabric over handle
support tube with fabric hook and
loop fasteners
- Slide back panel of canopy down
between handle support tube and
stroller handle
- Secure canopy sides around stroller
handle by securing hook & loop fasteners
on each side
- Repeat on other side of canopy.
To operate canopy window:
1.
Roll canopy window up towards top of
canopy.
2.
Thread hook & loop fastener through
sewn loop on back edge of canopy
fold over sewn loop and press strap
together
2
Repeat for other fastener.
2 (Fig. 7).
3
.
(Fig. 8).
4
(Fig. 9).
Handle
Rear
Canopy
Tube
1 ,
2
2
1
Back
Panel of
Canopy
Stroller
Handle
,
1
Fig. 6
Canopy
Retainer
Fig. 7
1
2
2
Handle
Support
Tube
Style May Vary
Fig. 8
3
4
Fig. 9
2
1
16