Telstar TLA018580MD Manual De Instrucciones página 30

AUTOMATIC WASHING MACHINE
TLA018580MD
INSTRUCTION OF THE WASHER OPERATION PANEL
1. Power Supply: [ON/OFF] button has function of open or close the power supply.
2. Start / Pause button has both function of startand pause. Continuously press this button, the machine will
be switched between start and pause mode.
3. WaterLevel Selection Before washing,consumer can select the water level according to the dirty de-
gree,material or weight of clothes. The detailed usage,consumer can refer to "The relationship between the
water level and load.
4. Function After start, one light will flash among the function of wash, rinse and spin according to real process.
5. Child Lock: Press [Start/Pause]button to start the program, then press [Wash] &[Rinse] button at same time
to start the child lock function, it can lock the selected program to avoid any unnecessary troubles while
children made the faulty operation. If consumer wants to close this function, they can re-press [Rinse]&[Wash]
button at the same time.
6. Delay: Long press "Delay"button,every 1s will increase 1 hour , and also have a beep once, when after
reach to 24 hours, it will return to the initial state. After "delay"starts(do not press "child lock"button),consumer
can review the set programs when press "delay" button again. When "delay"starts, there will be an"E3 alarm"if
consumer open the lid, and if consumer close the lid, this alarm will be released. Detailed usage, consumer
can refer to the description of "special function-delay function".
7. Program Selection: Before starting, continuously press this button to select the corresponding program:
[Normal], [Soft], [Soak], [Strong] [Quick],[Memory], [Air dry], [Tub Clean].
8. FCS function: FCS(Fast Clean System) Start up Fast Clean Stystem: Power on, select "Normal",
"Soft","Soak","Strong" program,then press FCS button. then press "Start/Pause" button, FCS function starts up.
The relative figures will be showed after FCS function starts up. Cancellation of FCS function: when the FCS
function was selected, The function can be cancelled by pressing any button except "Temperature","Water
level","Delay",or power off.
9. Temperature: Press the button to select different temperature water for wash.
30